Ancaster Cycle

Filter By:

  • Show More Brands
  • Show Fewer Brands

Trainers Catalog

Kinetic Skewer
$14.95
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Blackburn TS Ultra Quick-Release Skewer
$14.99
- Compatible With All Blackburn Trainers.
Giant G-Thang
$20.00
Giant's G-Thang keeps corrosive sweat from harming your bike during an indoor training workout. It's made from soft, absorbent, washable terry cloth and is attached to your handlebars and top tube via elastic and Velcro straps.
Giant Cyclotron Chopping Block
$25.00
Giant's Cyclotron Chopping Block supports and lifts your front wheel so you ride a level bike when you're on a trainer. It holds 700c and 26-inch wheels and has a stable, anti-skid base. It's made of ABS plastic for strength, low weight, and durability.
CycleOps Leveling Block
$26.99
Leveling block for indoor trainers
CycleOps Sweat Guard
$33.79
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
CycleOps Climbing Riser Block
$40.49
CycleOps' Climbing Riser Block offers 3 levels of elevation to lift your front wheel and provide a workout simulating climbing hills. For steeper climbing workouts, 2 climbing blocks (sold separately) may be placed on top of each other for many different adjustment levels.
CycleOps Magnetic Remote Shifter
$40.49
CycleOps' Magnetic Remote Shifter is for use with CycleOps' standard Mag trainers. It allows you to adjust the resistance without leaving the saddle and fits on your stem or handlebars.
Kinetic Riser Ring
$49.95
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support. • Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone
Blackburn Folding Trainer Mat
$54.99
No Sweat, No Scratches. When you train hard, you sweat. Good for your body, but not good for your floors. This mat keeps the sweat off your floors and also protects them from being scratched by your trainer, wheel block or cycling shoes. - Reduced Noisy Floor Rumble - Protects Your Floors
Kinetic 12mm Traxle Through-Axle
$54.99 - $70.00
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Giant Training Mat
$60.00
Giant's Training Mat is the best way to protect your floor from those hard trainer sessions. It covers the entire area, keeps your carpet sweat-free, protects the floors from scratches, and helps damp the noise. Made from rubberized material, it's anti-skid, rolls up easily and hoses right off. A mesh carrying bag with shoulder strap is included.
Kurt Kinetic Trainers Small Wheel Adapter
$64.99
Kurt's Small Wheel Adapter attaches to your Kurt Kinetic trainer and raises the resistance unit so you can use your trainer with small-wheeled bikes. This adapter works with bike wheels as small as 16 inches in diameter. Comes in two varieties to work with both old and new Kurt Kinetic trainers. • T-580 Small Wheel Adapter for use with all 2013 and newer trainer models. • Old trainer style uses T-500
Kurt Kinetic Trainers Turntable Riser Ring
$69.95
Get the natural feel of riding outside when you use Kurt Kinetic's Turntable Riser Ring in conjunction with Kurt Kinetic's Rock and Roll trainer (sold separately). The Turntable Riser Ring elevates your front wheel so you get a more natural riding position, and thanks to the swiveling base, you can use your most natural pedal stroke.
Blackburn Trainer & Trailer Adapter Kit
$69.99
Blackburn's axle conversion kits make your thru axle bike compatible with most trainers and many trailer hitches on the market. The adapter kit is designed to turn your 12mm x 135mm, 142mm, or 148mm thru axle bike into a trainer-ready machine or a trailer-pulling family explorer. Choosing the correct axle is simple. First, research which axle spacing your bike utilizes (135, 142, or 148mm). Next, choose the correct thread pitch by either comparing your thread spacing to Blackburn's thread scale on the packaging, or by matching to one of the brands listed below: - RockShox Maxle - 1.75mm thread pitch - Syntace X-12 - 1.0mm thread pitch - DT x-12 - 1.0mm thread pitch - Shimano E-Thru - 1.5mm thread pitch - DT E-Thru - 1.5mm thread pitch
CycleOps Trainer Thru Axle Adapter
$69.99
Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco
Wahoo Fitness RPM Cycling Cadence Sensor
$69.99
The Wahoo Fitness RPM Cycling Cadence Sensor is wireless, magnet-less and lightweight and sleek. It is Bluetooth 4.0 and ANT+ enabled for easy installation and it connects wirelessly to your iOS or Android device, and displays your cadence data (through the free Wahoo Fitness App or your favorite cycling app). It can also be worn on your shoe or installed directly on your bike.
CycleOps 20-/24-inch Wheel Adapter
$80.99
CycleOps' 20-/24-inch Wheel Adapter allows you to attach your BMX or recumbent bike to your trainer (sold separately). The adapter raises the resistance unit up for smaller wheels. It's compatible with CycleOps' Wind, Mag, Mag+, Magneto, and Fluid² trainers.
CycleOps Trainer Bag
$80.99
When you need to transport your trainer, CycleOps' Trainer Bag is the most convenient solution. There is no need to worry about your trainer getting damaged when it's safe and secure on the way to your race or event.
CycleOps Trainer Thru Axle Kit
$80.99
- Adapts a thru axel hub bike for a trainer. - Only compatible with current classic series trainers. - Fits most 142-148 Thru axle bikes with 1.0 or 1.75 thread pitch - Kit consists of an axle, washers, end caps with bolts and a shorter version of our bolt action slider for the classic series trainer. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems.
CycleOps Q-Synce Multiremote
$94.49
- Remote control for CycleOps VirtualTraining to allow the rider to change the ride view, mark intervals, pause and virtually change gears when using with 400 series or Phantom 5 Indoor Cycle. - Compatible with tablet and mobile devices via Bluetooth Smart only (iPad 3 or newer, iPhone 4s or newer.) - Compatible with PC via ANT+ or Bluetooth Smart (Bluetooth Smart connection Windows 8 or ANT+ connection requires ANT+ dongle/antenna.)
Kinetic Pro Flywheel
$99.95
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.
CycleOps Rollers Fork Stand
$121.49
With CycleOps' Rollers Fork Stand anyone can ride rollers! Just attach this little beauty to your rollers, clamp your fork in place, get on and ride. It's that simple. The Fork Stand mounts directly to the frame of your rollers for excellent strength and stability. No balancing is necessary, so you can watch television or read while riding your rollers!
Kurt Kinetic Trainers Trainer Mat
$124.99
Kinetic's Trainer Mat is a simple necessity for any cyclist who cherishes a clean training environment. It keeps floors clean and sweat-free and reduces vibration. Durable closed-cell PVC foam means it will stand up to even the most intense training sessions.
Wahoo Fitness Tickr X Heart-Rate Sensor
$127.00
Train Free, Train Perfect with the Wahoo Tickr X. This ultimate workout wearable is the latest addition to the Tickr family, and it tracks workouts with and without your phone. The Tickr X's memory feature captures heart rate and calorie burn even if your phone isn't connected - perfect for those days where you forget your phone or want to leave it in your gym bag. It also tracks additional motion analytics such as cycling cadence. It's the perfect fitness tracker for all types of athletes!
Kurt Kinetic Trainers Trainer Bag
$129.99
Protect your fine Kurt Kinetic trainer and make it easy to transport with their Trainer Bag. This sturdy nylon bag is large enough to hold your Kurt trainer and Riser Ring, and it's easy to carry thanks to the strong handle and removable shoulder strap. The Trainer Bag zips closed and has a handy zip front pocket, too. Kurt Trainers and Riser Rings are sold separately.
Blackburn Mag 1 Trainer
$159.99
In the Tech Mag 1, Blackburn delivers a high quality trainer that lives up to the production and quality standards of the brand, yet is simple, easy to use and affordable. - Single resistance setting for no-fuss operation - Compact, lightweight and foldable design - Rubber feet micro-adjust for extra stability - Includes steel quick release wheel skewer so that your original equipment does not get scratched - No assembly required - Bike installation is simple and works with many wheels sizes from 26 x 1" to 29 x 2.3" - 6713g / 14.80lb Dimensions: -Length 550/550mm/21.7/21.7in -Width 550/480mm/21.7/18.9 -Height 415/160mm/16.3/6.3in
CycleOps Roller Resistance Adapter
$161.99
CycleOps' Roller Resistance Adapter offers five different levels of magnetic resistance. And, with its ingenious resistance system, which doesn't use any moving parts, it's virtually silent!
CycleOps Wind Trainer
$229.49
CycleOps' Wind Trainer provides all the cardiovascular exercise you can handle. Heavy die-cast zinc fan blades double as a flywheel for smooth, progressive resistance. The faster you pedal, the harder your workout... just like riding your bike on the open road.
Giant Cyclotron Mag Trainer
$259.95
- Quiet magnetic unit with 7 resistance levels activated by handlebar mounted thumb shifter - Handlebar mounted, 7-level thumb shifter, quickly mounts on handlebars from 22.2mm (7/8") up to 31.8mm (1 1/4") - Precision–turned 2" aluminum roller and 1500g (3.3lbs) flywheel - Heavy-duty, 100% steel, TIG welded frame with wide stance and tough powder coating that looks great and resists rust - Non–skid rubber adjustable leveling feet - Tough steel replacement quick-release skewer included - Accommodates most 24", 26", 700C, and 27" wheel/tire sizes
Page 1 of 3 Next page