Other

- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

Seatpost lever and cable set for Giant's Contact Switch Seatpost

- CNC machined 6061-T6 alloy - Extra long 72mm clamping lever - Provides extra leverage - 13mm clamp height

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

- Wrist pressure relief ergonomics - Multi adjustable brackets - Multi position wide armrests - 1cm soft foam arm pads - Weight: 241g (Ski-Bend), 237g (S-Bend) - 22.2mm extension clamp diameter - Compatible with 31.8mm handlebars

V2 Plus Aerobars with S-bend extensions offer a higher rise for comfort and reduced fatigue in the aero position. The aerobar features a low stack armrest position and forged bracket system that places the extension below the basebar. - F-19 adjustable anatomic armrests with 4 position fore/aft adjustment to dial in the fit, and Velcro-backed EVA foam pads that affix directly to armrest without straps - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar Tech specs: - Extension: V2+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 175mm – 130mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 490g

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Focus Part #KD325914002 - Attaches to frame with (3) M4x8 flat head screws (sold separately) - CNC machined 6061 aluminum - Black anodized finish

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x10 Flat head screw included - For Di2 shifting systems

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Salsa part #F82323 - Attaches to frame with (1) M4x16 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

Replacement derailleur hanger for Specialized Diverge, CruX, and Roubaix Carbon SCS frames with NON-SCS 135 x 12mm thru-axle hubs. Note: This hanger is not the same as our DROPOUT-284, which is for use with SCS 142x12 wheels. - All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (1) M5x10 Socket Head Screw (sold separately)

M8 Bolt for DROPOUT-202 - Threads: M8x0.75 - Length Under Head: 1.050-inch - Head Diameter: 0.415-inch - Black anodized - Sold Individually - Made in the USA

Wheels Manufacturing 1-1/8 4-Piece Headset Spacer Kit includes an assortment of black anodized aluminum headset spacers for 1-1/8" fork steerers. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M3x10 Flat Head Screw

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x10 Flat Head Screws

- Black carbon fiber weave headset spacers for tuning ride height, no logos - Kit includes 1-1/8" spacers: (15) 2.5mm, (25) 5mm, (16) 10mm, (2) 15mm, (4) 20mm

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included Note: This dropout can be used in place of Wheels Mfg DROPOUT-246. The only difference is the number of fasteners.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Norco part #959375-16-1 - (1) M8 Bolt for DROPOUT-276 included Notes: - For use with direct mount Shimano Saint rear derailleur. - If using direct mount Shimano XTR, XT or SLX rear derailleur, use Wheels Mfg DROPOUT-275. - If using any non-direct mount rear derailleur use Wheels Mfg DROPOUT-202.

This assortment of chainring spacers contains 120 pcs. in a clear plastic storage box. Kit includes: - (20) 0.6mm - (20) 1.2mm - (5) 2mm - (5) 3.8mm - (5) 2.2mm - (5) 3mm - (5) 3.5mm - (10) 4mm - (10) 4.3mm - (10) 4.6mm - (10) 5mm - (5) 5.3mm - (5) 7.1mm - (5) 8.3mm

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Raleigh part #99-45-0057 - Attaches to frame with (1) M8 chainbolt (sold separately) - CNC machined 6061 aluminum - Black anodized finish

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Santa Cruz Part #23-18684 - Fits Santa Cruz frames with 12 x 148mm thru axles only - CNC machined 6061 aluminum - Black anodized finish

All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with (2) M4x12 Flat Head Screws - Fasteners not Included - For 12x1 Thru Axle Frames - Replaces Parlee Part #PC-F-10

Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.