Ancaster Cycle

Filter By:

  • Show More Brands
  • Show Fewer Brands

Handlebars

TruVativ Descendant Carbon Flat Handlebar
$204.99
Uncompromising control and unflinching style. Based on the width of Enduro superstar Jerome Clementz, the Descendant carbon flat bars bring comfort and control to riders seeking the aggressive position a flat bar offers. Descendant series bars are the new benchmark for control and comfort. - Material: Carbon fiber - Width: 750mm - Backsweep: 7-degrees - Bar Clamp Diameter: 31.8mm - Colors: Black
Pro Missile Base Bar
$129.99
- Aerofoil top section - 10 degrees tilted up bar ends - Within 3:1 UCI regulation - Internal cable routing - Weight 255g - 5mm drop - Hydroformed 6061 aluminum
Pro Stealth Evo Stem/Bar Combo - Anatomic
$869.99
- Fully integrated UD Carbon stem-handlebar combination - Integrated Dual Cable Routing - Sizes: 40, 42 and 44cm (C/C) - Extensions: 90-130mm - Angle: -8 degree - Suitable for 1-1/8" forks - Color: UD Carbon - Weight: from 410g
Pro Tharsis XC Flat Top Di2 Handlebar
$279.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 160g - Di2 compatible with internal wire routing - 720mm wide - 31.8mm clamp diameter - 5mm rise
Pro Tharsis XC Riser Handlebar
$244.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 173g - 740mm wide - 31.8mm clamp diameter - 15mm rise
Salsa Rustler Bar 2
$124.99
Point your bike toward adventure with Salsa's Rustler Bar 2. This strong, lightweight aluminum handlebar features a 20mm rise and wonderful 750mm width to put you in control on every trail.
TruVativ Holzfeller Riserbar
$86.99
TruVativ's burly Holzfeller Riserbar is made from butted 7050 aluminum to take gravity-fueled abuse like a champ. This 730mm-wide bar gives you awesome leverage to muscle your rig and the rise gives you an upright position for greater control in nasty rock gardens as well as increased confidence on steep descents.
Profile Design F-19 Replacement Pads (Velcro Strap)
$34.95
Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro straps for easy installation.
WeThePeople Patrol Handlebar
$119.99
The Patrol bar uses a larger bending radius and classic geometry to give it that timeless look. No crazy features here, just a strong, light handlebar perfect for roasting through the bigline or carving round the local bowl. - Material: Full liquid post heat-treated 4130 "M2" chromoly - Tubing: 7/8” multiple butted - Backsweep: 12 degrees - Upsweep: 1.5 degrees - 19mm crosstube
Zipp Service Course SL-70 Handlebars
$140.99
Zipp’s Service Course SL-70 bars let you dial in the perfect fit. A short reach to the brake hoods and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Salsa Salt Flat Bar 2
$124.99
Speed and control are always at hand with Salsa's Salt Flat Bar 2. This strong, lightweight aluminum handlebar features a slight 11-degree rise to put you into an aggressive, XC position on the bike.
Giant Connect Trail Riser Handlebar
$29.99
From loamy backwoods adventures to rocky desert expeditions, Giant's Connect Trail Riser Handlebar puts you in contact with it all. It's made from tough 2014 aluminum. And, it has plenty of width, which provides pinpoint steering on techy trail sections plus leverage for climbing and sprinting.
TruVativ Hussefelt Comp Riserbar
$41.00
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Profile Design Airstryke Clip-on Aerobars
$245.99
Profile Design's Airstrykes are so quick your competition won't know what hit them! Grab these light aluminum bars, get in a comfy, aero tuck and you’ll fly faster with the same effort. Plus, the spring-loaded F-19 arm rests rotate up so you can quickly and easily access a comfortable climbing position. With these versatile bars your PRs don't stand a chance! Plus, the Airstrykes fit most handlebars thanks to Profile's ingenious Multi-Fit System.
Profile Design T4+ Carbon Clip-on Aerobars
$329.99
Profile's T4+ Carbon Clip-on Aerobars feature ergonomic shallow-angle ski-bend extensions made of carbon for lightness, durability and a great fit and feel. These clip-ons also boast Profile's F-35 anatomic armrests and their J4 brackets so that you have length, width and arm adjustments for easily achieving the perfect aero tuck.
WeThePeople Buck Bar Dillon Lloyd Signature
$120.00
A beast like pro rider Dillon Lloyd needed a bar built to withstand the biggest drops and burliest of crashes. The Buck bar is one of the first bars in BMX to utilize the new 25.4mm clamping technology, allowing for a stronger, stiffer bar that a rider like Dillon can have full confidence in, without having to worry about it slipping or breaking when things get rough. WeThePeople used time-tested "M2" heat-treated, 4130-chromoly tubing and Dillon's own geometry to create this ultra-dependable set of bars you can get "Buck" with. - Tubing: 7/8" multiple butted - Easy-cut marks on the end of the bars - Dual radius bends for extra strength - Backsweep: 11-degrees - Upsweep: 1.5-degrees - Weight: 22.2mm bar: 895g (31.5oz/1.97lbs), 25.4mm bar: 925g (32.48oz/2.03lbs)
Profile Design Stoker 26 Base Bar
$72.00
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Zipp Vuka Stealth Integrated Aero Bars
$1,289.99
Send a shiver down the spine of your competition with Zipp’s integrated Vuka Stealth. This ultra-stiff, fully carbon cockpit is even faster than it looks. With almost 2,000 fit options, dialing in your perfect position is finally possible, allowing you to get more aero, produce more power, and conserve more energy. Choose from three stem lengths, each of which includes spacers to increase stem length by an additional 10mm. You can make additional adjustments to the stack, reach, and pad width and position, as well as extension width and length (extensions are sold separately). The base bar's truncated airfoil reduces drag and meets all UCI regulations, while the grips are roughened so you don't need tape. Zipp's Rapid Routing makes running the cables inside the bars easy so everything is tight, orderly, and above all—fast.
TruVativ Descendant Troy Lee Design Handlebar
$135.99
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
FSA K-Force Compact Road Handlebar
$539.99
FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
TruVativ Stylo T20 Riserbar
$41.99
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ Stylo T20 Flatbar
$28.00
TruVativ's Stylo T20 Flatbar is made from butted aluminum for low weight and high strength. At 600mm wide, it gives you a nice XC width without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
Salsa Cowchipper Drop Bar
$137.99
Salsa designed the Cowchipper to be the control center you want for road touring and long days on mixed surfaces. While the Cowchipper retains some resemblance of a traditional road bar, it takes a new approach by offering a radical 24° flare in the drops, and thus, boosts leverage and stability dramatically. - AL-7050-T6 construction - 24° flare in the drops - 120mm wide center section - 31.8mm bar clamp diameter - 96mm reach - 116mm drop - 40, 42, 44, and 46cm sizes available (measured center to center) - Aero bar compatible
TruVativ Descendant Carbon Riser Handlebar
$204.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
TruVativ Descendant Riser Handlebar
$89.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
Profile Design T1+ Clip-on Aerobars
$199.99
Profile's T1+ Clip-on Aerobars feature Stryke-bend extensions with length, width and arm-rest adjustment so you can easily achieve your perfect aero position. The 6061 aluminum extensions keep weight down, while the forged brackets provide strength exactly where you need it. You'll get fast and stay there thanks to J2 brackets for an adjustable lower arm position, giving you an edge over your competition whether it's other racers or your own personal record.
Profile Design T3+ Carbon Clip-on Aerobars
$329.99
Profile's T3+ Carbon Aerobars feature length, width and arm-rest adjustment so you can easily achieve the perfect aero tuck. These fast, lightweight bars also include internal cable routing to give you another edge over your competition, whether you're racing others or your own personal record.
Profile Design T2+ Carbon Clip-on Aerobars
$329.99
Profile's T2+ Carbon Clip-on Aerobars feature carbon ergonomic S-bend extensions with 30mm of rise for lightness, durability, and a great fit. These clip-ons also boast Profile's F-35 anatomic armrests and their J4 brackets so that you have length, width and arm adjustments for easily achieving the perfect aero tuck.
Profile Design ZBS S-Bend Clip-on Aerobars
$203.99
Profile Design's ZBS S-Bend Clip-on Aerobars are made of light and durable 6061 aluminum and feature their ZBS brackets that provide a low arms position so this design is great for aggressive time trial and triathlon riding positions. It also boasts their F-19 adjustable anatomic armrests.
Profile Design T4+ Clip-on Aerobars
$199.99
Profile's T4+ Clip-on Aerobars are made of light and durable 6061 aluminum and feature ski-bend extensions with length, width and armrest adjustments so you can easily find a perfect aero position. These clip-ons have Profile's J2 brackets for a low, aero arm position and their comfortable adjustable F-19 armrests.
Page 1 of 4 Next page