Ancaster Cycle

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

Topeak Alien II
$74.99
When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.
Park Tool Deluxe Home Mechanic Repair Stand w/105-5D Clamp
$458.99
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
Park Tool Crank Puller (Square Taper)
$24.00
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
Finish Line 1-Step Cleaner and Lubricant
$13.00 - $19.00
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
Crank Brothers m19
$44.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Park Tool Deluxe Wall-Mount Repair Stand with 100-3D Clamp
$316.99
The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Professional Micro-Adjust model, which features replaceable rubber jaws; fits seatposts and frame tubes from 7/8 to 3-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.
Feedback Sports Recreational Repair Stand
$216.99
Being a “shade tree mechanic” doesn’t mean you should lean your bike against a tree. You paid hard-earned money for your family’s bike collection and we’ve got a budget-conscious, yet feature-loaded bike repair stand that’s perfect for the home bike mechanic. The 360-degree rotating clamp can position your bike optimally for any work you’re planning. Plus, the Recreational Stand leverages a 52? (132cm) wide base with rubber-coated end caps for fantastic stability on any surface. And when the service day is done, it folds in to a space-saving unit for storage. Add a Tool Tray, Bottle Opener and a Wheel Truing Station for the complete at-home bike shop.
SRAM SRAM Butter Grease
$13.99 - $54.99
SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!
Crank Brothers m17
$36.99 - $37.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Park Tool Valve Core Tool
$16.99
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.
Park Tool I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool
$39.99
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.
Finish Line E-Bike Lube
$16.00
E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.
White Lightning Bamboo Cycle Wipes
$2.00
White Lightning's Bamboo Cycles Wipes are the quick and easy solution for cleaning your hands, your bike, and anything else you can find. Made from bamboo, Cycle Wipes are tough, durable, and tear-resistant. They have a waffled texture that absorbs more grease and grime than ordinary wipes and are treated with a solution that is strong enough to clean drivetrain parts, plus safe enough to clean your hands, too. White Lightning's Bamboo Cycle Wipes are biodegradable.
Finish Line E-Shift Groupset Cleaner (16-Ounce Spray)
$22.00
Finish Line's E-Shift Groupset Cleaner is specially formulated to keep your sensitive and expensive electronic drivetrain clean and safe. It quickly and safely removes grit, grime and moisture from electric shifting drivetrain components, including the front and rear derailleur, derailleur pulleys, chain, cassette and even the crankset. E-Shift is safe and will not harm the wires or electronics. Plus, it dries in minutes leaving the drivetrain parts clean, and with no rinsing required.
Avid DOT 5.1 Brake Fluid
$20.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
DT Swiss Spoke Freeze
$98.00
- Spoke thread treatment for DT-Swiss by Loctite - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond
Finish Line Shop Quality Chain Cleaner
$40.00
Finish Line's Shop Quality Chain Cleaner is quick, efficient and easy to use. With it, you never have to remove your chain to keep it clean. Its triple rotating brushes and scrubber pads provide fast, thorough cleaning, while your hands stay clean. Plus, its rugged plastic construction is virtually unbreakable.
Finish Line Fiber Grip Assembly Gel (1.75-Ounce Tube)
$14.00 - $56.00
Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.
RockShox 24mm Misson Control Damper Wrench
$49.99
RockShox's 24mm Misson Control Damper Wrench is an essential tool for working on suspension components. This shop quality tool features a long, comfortable handle. The thin profile allows you to remove 24mm dampers without removing knobs for easy service.
Wheels Manufacturing Inc. Headset Cup Drift
$54.99
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
Wheels Manufacturing Inc. Bottom Bracket Sealed Bearing Extractor Set
$126.99
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
Wheels Manufacturing Inc. PRESS-1 & PRESS-4 Replacement Rod
$24.99
Replacement rod for Wheels Mfg. large sealed bearing press (PRESS-1 ) and economy bearing press (PRESS-4 ). Primarily designed for pressing bearings into hubs. - 3/8" x 12TPI threaded rod - 8.75-inch length - One end is drilled and tapped for M5x12mm flat head screw to secure fixed-end handle to rod - Does not include screw (can re-use existing screw)   - This is NOT a replacement for Wheels Mfg. universal bottom bracket press (PRESS-7 )
Topeak PrepStand Max
$199.99
Topeak's PrepStand Max is lightweight and folds into a compact, portable package ideal for bringing to cycling events or keeping in your car, just in case. Hard rubber jaws hold your bottom bracket securely, while the front wheel hook adds stability when wrenching on your bike.
Feedback Sports Pro-Elite Commercial Clamp
$283.99
Our patented Secure-Lock ratchet-action closure and push-button release clamp head, found on the award-winning Pro-Elite Repair Stand, became so popular we decided to make it compatible with steel bike shop repair stands. The versatile and patented 3.25? (8.3cm) wide clamp is capable of managing any bike frame, up to 2.6? (6.6cm). When you see the Pro-Elite Commercial Clamp upgrade in your bike shop, you know you’re in the presence of experts. NOTE: This is NOT a suitable upgrade for our folding tripod repair stands. Please contact Feedback directly to order the Pro Elite folding clamp head assembly.
DT Swiss Internal Nipple Wrench
$22.00
- Professional wrenches fit internal nipples on many deep section aero rims
Topeak PrepStand Elite
$333.99
The PrepStand Elite is a super workstand that folds up into its included nylon carrying case to become extremely portable, as well. Its wide base and rubber jaws hold your bike securely while you work and it also features a handy small-parts bin that keeps the parts and tools you need close at hand. Plus, the PrepStand clamp rotates 360-degrees to make repairs easier than ever.
Hayes Brake Tools
$64.99
- This set of tools is essential for servicing a Stroker Ace caliper
Topeak Alien XS
$34.99
16 tools are integrated into Topeak's light, compact Alien XS. Tools include 2, 2.5, 3, 4, 5, 6 and 8mm Allen wrenches, 8, 9, 10mm box wrenches, Phillips and regular screwdrivers, 14- and 15-gauge spoke wrenches, stainless-steel knife, and a handy bottle opener. The Alien XS has a molded-plastic body for excellent gripping as well as a nylon carrying case, too.
Topeak PrepStation
$916.99
All you ever needed to work on your bike—and more — is available with Topeak's comprehensive PrepStation. In addition to over 40 pro-quality tools, you also get an easy-moving wheeled trolley with one covered parts tray, four swiveling tool trays and a 9.4-inch-tall storage compartment to carry parts for every job. With an extendable handle that locks, it's simple to maneuver the PrepStation from the garage, to the car, at the trailhead, or anywhere. It's perfect for bike shops, race-day maintenance, or simply as your home tool station.
Topeak Weight Scale
$99.99
Weight freaks rejoice! Topeak's Weight Scale is the perfect addition to your PrepStand Pro or PrepStand Elite. It quickly and accurately measures anything from small parts all the way up to bikes and wheels.
Page 1 of 30 Next page