Filter By:
Fenders

$33.00
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

$43.00
Topeak's DeFender XC11 for 27.5-inch wheel bikes is a rear fender that offers durable rain and mud protection on wet and sloppy rides. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit. It's incredibly light, too.

$18.00
Keep the crud off your frame with the Fox Mud Guard. Designed to fit multiple fork and wheel sizes, the Mud Guard is an essential accessory for riding in wet environments.
- Universal design fits most current forks

$30.00
An innovative adapter that adds eyelets to any QR-equipped bike, facilitating the mounting of traditional fenders to bicycles lacking front and rear eyelets.
CONSTRUCTION
• Lightweight red anodized aluminum
MOUNTING SYSTEM
• Mount to quick release skewer
ADDED BENEFIT
• A quick and easy solution to make fenders fit
• Set of four

$35.00
A simple yet effective alloy adapter that facilitates the mounting of traditional fenders to bicycles equipped with disc brakes.
CONSTRUCTION
• Lightweight aluminum
MOUNTING SYSTEM
• Mount to eyelets
ADDED BENEFIT
• A quick, easy and relatively inexpensive solution to make fenders fit
• Sold as a pair

$90.00
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. These fenders are easily mountable with either O-rings or the included zip ties, and are compatible with most disc brake-equipped bikes.
Weight 575 g / 1.26 lbs (pair)
Mounting system
- Below: Mount on frame or fork via included Frame-Runners
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Construction
- Alloy/Engineering plastic FRAME-RUNNER mounts
- 360 degree visibility 3M Reflex sides
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Added Benefit
- Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets
- FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties
- 3M Reflex side panels offer 360 degrees of reflective visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Extended mudflaps keep feet dry and reduce rear spray
- Sold pre-assembled for quick mounting
- Compatible with most disc-brake-equipped bikes

$27.00
Easy-to-install rear fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
• 100% recyclable
• Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket
• Hardware included
• Weight: 190 grams / 6.7 ounces

$60.00
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Weight: 606 g / 1.34 lbs (pair)
Construction
-Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting System
Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting

$15.00
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 35cm / 13.8" (in length)
- Weight: 68g / 2.40oz

$14.00
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 31.7cm / 12.5" (in length)
- Weight: 42g / 1.48oz

$20.00
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes.
- Material: Polypropylene
- Added Features: 3M reflective printing
- Size: 57.5cm / 22.6" (in length)
- Weight: 75g / 2.65

$18.00
Topeak's DeFender FX front fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The FX installs easily to your fork and features quick-release attachments that allow it to be installed and removed in seconds.

$27.00
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$53.00
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c.
- Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment
- Injected high impact resistant plastic with aluminum struts
- Adjustable angle and position for perfect tire coverage
- 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear)
- Weight: 192 grams (Front); 245 grams (Rear)

$80.00
Topeak's DeFender iGlow TX combines a compact trekking bike fender set with Integral Glow (iGlow) illumination technology for safety at night and low visibility conditions. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender iGlow TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c.
- Brake bolt and fork eyelets attachment (front); Seat tube and seatstay or chainstay eyelets attachment
- Injected high impact resistant plastic with aluminum struts
- Adjustable angle and position for perfect tire coverage
- Lamp: 0.5W super bright white (front) / red (rear) LED
- Battery: CR2032 x 4 (included)
- Weight: 220 grams (Front); 278 grams (Rear)

$10.00
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

$10.00
Topeak's RX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and road grime.

$22.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$10.00
Features
- Compatible with common wheel and tire sizes
- Helps keep the back side of suspension fork bridges clean
- Multi-color Giant logo sticker pack included

$21.00
- Unique softer PP material helps prevent cracks in extreme temperatures
- UV resistance for increased durability.
- Proprietary bracket design helps keep fender stable on the bike
- Front model fits most down-tubes
- Rear model offers adjustable angle

$44.99
Giant's Speedshield fenders are a simple, lightweight way to fend off muck and grime. All-weather polycarbonate construction offers years of reliable service, and the adjustable stainless steel hardware is stable and easy to install.

$50.00
- Designed for compatibility with 700c bikes without mounting points
- Ideal for Giant Defy Advanced and Liv Avail Advanced disc brake bikes
- Quick adjust gap between fender and tire
- Tool-Free universal mounting system offers flexibility for bikes without fender eyelets
- Full coverage protection

$16.99 - $18.99
- Technopolymer construction
- Durable and weatherproof material
- Fits most forks
- Zip ties included

$90.00
A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders.
Weight 610 g / 1.34 lbs (pair)
Construction
- Alloy/Engineering plastic FRAME-RUNNER mounts
- 360 degree visibility 3M Reflex sides
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting system
- Below: Mount on frame or fork via included Frame-Runners
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets
- FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties
- 3M Reflex side panels offer 360 degrees of reflective visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Extended mudflaps keep feet dry and reduce rear spray
- Sold pre-assembled for quick mounting
- Compatible with most disc-brake-equipped bikes

$57.00
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Note: The Roadrunner AR - Road fender fits 700c wheels up to a width of 28mm
Weight: 548 g / 1.21 lbs (pair)
Construction
- Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
- Mounting System
- Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting

$15.99
Versatile, flexible, front fender for mountain bikes. Fits virtually any fork with arch in front and any tire diameter with width up to 3.0".
- Slop Stop - The Slop Stop leading edge catches mud and water the tire picks up and flings forward. Catching this slop at the tire helps prevent it from getting blown into your face!
- Seal Shield - The Seal Shield drop section wings provide an effective barrier to trail debris and muck, helping keep your fork seals cleaner longer.
- Flop Stop - The Flop Stop rear section's carefully engineered fold provide stiffness. This stiffness prevents the fender from contacting the front wheel and getting sucked into the fork, stopping you in a hurry! The folds also contour the fender around the tire making it a better mud guard.
- Includes 4 reusable zip ties
- Weight: 27g

$57.00
A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics.
Weight: 752 g / 1.66 lbs (pair)
Construction
- Forged alloy RAINRUNNER Q/R mounts
- 3M Reflex rear reflectivity
- Virtually unbreakable Techniflex body
- Stainless steel stays
- Safety front stays
Mounting System
- Below: Mount to Quick-Release skewers via included AXLE-RUNNERS
- Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties
Added Benefit
- Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets
- 3M Reflex rear logo enhances visibility
- Support stays spaced for maximum stiffness and frame compatibility
- Front fenders equipped with safety stays to protect against objects becoming lodged in wheel
- Sold pre-assembled for quick mounting
Page 1 of 1